Naked SUP | Wall Display | Minimalist Paddle Board Rack

Description

The Naked SUP is the ultimate rack for your paddleboard.  It is both functional and aesthetically pleasing, with a minimalist approach, disappearing into the background and letting your SUP take the spotlight. Display and show off your SUP, not the rack!  If you're looking for a lightweight, affordable, and non-intrusive way to show off your favorite paddleboard then the Naked SUP is an excellent option.
The Naked SUP looks minimalistic but the
construction
is rock solid to support your SUP.  The Naked SUP rack arms are made from a single piece of aluminum that have been custom cut and bent. Each rack arm has two pre-drilled holes that allow you to mount two screws in a single stud. The combination of all-aluminum construction with the 2-screw mounting pattern makes the Naked SUP incredibly sturdy for its size and appropriate for a majority of SUPs on the market.  The rack arms have been "pre-bent" slightly above horizontal so when a heavy SUP is loaded the arms do not sink below parallel with the floor, a very secure design. Lining the inside of each rack arm is a thick piece of felt padding. This provides a soft place to rest your paddleboard and prevents any long term pressure point distortions.
The Naked SUP is offered in a sleek matte black powder coat finish that looks great and is very heavy duty. Even though the rack is mostly hidden when displaying your paddleboard, we have still gone the extra mile to make what little that does show look awesome!
Recommended
Paddleboard Sizing
SUPs come in many shapes and sizes so it is a challenge to have one rack that fits every SUP. Here are ideas of the sizes that the Naked SUP Rack can hold:
Weight: Boards up to 50lbs
Width: Boards up to 36 inches wide
Thickness: Boards up to 6 inches thick
Length: Any (the rack arms are independent and can be mounted as far or as close together as needed to
accommodate
your SUP)
-The Naked SUP works well with most inflatable SUPs.  We know it can be a
hassle
to constantly inflate and deflate them.
-The Naked SUP is NOT meant for touring boards, they have too wide of a hull and the geometry to lean the board back against the wall does not work.
The Naked SUP is our newest addition to the Naked Rack lineup. It took the longest to develop due to the size and weight of paddleboards.  It is one thing to make a rack to hold a skateboard or short surfboard on the wall and it is another thing to hold up a 50lb SUP that is 12ft long.  We introduced a new strengthening rib that adds a lot of rigidity and strength while keeping the rack as low profile as possible.
11" long - distance out from the wall
6.5" along wall
2" wide
4.5" front lip
Spacing between the 2 mounting holes on the rack arm: 1"
Diameter of the mounting hole: 3/16"
Aluminum construction